After your hardware has been physically installed, you need to add and configure it within the Mero platform. The Devices tab is your central hub for managing all your physical hardware.
Viewing Device Status
Navigate to Settings in the bottom-left menu.
Select the Devices tab.
This screen provides a complete overview of all your connected hardware. You can monitor key information at a glance, and even customize the columns you see:
Name & Device ID: The unique identifier for the hardware.
Location: The building and area where the device is assigned.
Status: Shows whether the device is currently Online or Offline.
Last Seen: The last time the device successfully communicated with the Mero platform.
Signal Strength: An indicator of the device's connection quality (Low or High).
Assigned Buildings: The buildings the device is associated with.
Editing and Deleting a Device
To manage an individual device, click the three-dot menu on the right-hand side of its row.
Edit: This allows you to change a device's settings, such as its nickname or location assignments. For example, a single base station can be assigned to cover multiple areas from this screen.
Delete: This will permanently remove the device from your organization.
Adding & Importing Devices
Add Device: To add hardware one by one, click the Add Device button. This process is used for all hardware types, including Networking Equipment and Base Stations. For detailed steps, please refer to the specific installation guides:
Import: For large setups, you can add multiple devices at once using a CSV file. Click the Import tab on the top right of the Devices page and follow the prompts.